How To Make CBD Oil

CBDISTILLERY

Buy CBD Oil Online

Follow our 7 easy step guide on how to make CBD oil at home with tools and resources that you can find at home or your nearby store. CBD oil can be expensive. Is it possible to make CBD oil at home? What ingredients do you need and what does the process look like? Read this article to find out! Find out how you can improve your wellbeing and save some money by making your own CBD oil at home.

How to Make CBD Oil at Home in Just 7 Easy Steps

If you want to know how to make CBD oil at home, you’ll be pleased to know it’s a lot easier than you think. Keep in mind. It won’t be the same quality and retention of plant compounds as professionally done by companies such as ourselves.

Sure, you can get it from an outside vendor, yet there’s something about homemade cannabis edibles that makes things fun. We all know there are different ways vendors do it. CO2 extraction is all the rage, but you’ll need a lot of money to buy the equipment and pay the technicians who operate it for you.

You may also have heard of alcohol extraction. While accessible, this isn’t the easiest way to do it. The method we’ll cover today means you probably won’t even have to don your mask and visit the grocery store. Everything you need is either in your cupboard, pantry or fridge. If you’re still missing something, you won’t drop more than a couple of bucks.

So if you:

    1. a) Own a stove
    2. b) Are on a budget
    3. c) Have no clue what you’re doing

    …this is your chance to quickly and easily learn how to make CBD oil at home.

    How to Make CBD Oil: The Full DIY Guide

    Before we get to cooking, it’s important we understand some fundamentals about CBD and CBD oil. We could go on forever with the fine details, but all you need to know right now are the types of CBD products and some easy science.

    Types of CBD

    If you visit a CBD company’s website, you’ll likely come across the terms “full-spectrum,” “broad-spectrum,” or “CBD isolate.”

    These labels refer to cannabinoid and terpene content – if any. Let’s take a quick look at what each product means.

    Full-Spectrum

    Full-spectrum CBD oil (a.k.a. “whole plant extract”) contains all other cannabinoids and terpenes found in the source plant. Different plants contain different chemical profiles, but full-spectrum products will always contain some traces of THC.

    However, THC won’t cause intoxication in such low doses, and even helps the overall potency of your CBD mixture, thanks to the “entourage effect.” This synergistic relationship between cannabinoids and terpenes effectively allows them to complement or improve the potency and effects of your CBD oil.

    One complaint people have, though, is that full-spectrum maintains a strong cannabis or “hempy” taste.

    Keep in mind, the homemade CBD oil method we cover doesn’t allow you to filter out any compounds, keeping your CBD rich in cannabinoids and terpenes – in other words, full-spectrum.

    CBD Isolate

    CBD isolate is a product containing up to 99% CBD, with all other compounds completely gone. It’s colorless, odorless, and flavorless. Some vendors who want their edibles or oils to be unaffected by any plant aroma often choose CBD isolate.

    Although it’s almost pure CBD, isolate lacks any of the beneficial cannabinoids and terpenes that work to trigger the entourage effect. Consequently, the therapeutic benefits of CBD isolate are limited compared to other forms.

    Broad-Spectrum

    Broad-spectrum CBD is the middle ground between full-spectrum and CBD isolate. It retains the same compounds as full-spectrum CBD, but with all traces of THC removed.

    This is handy if you’re worried about triggering a drug test (which is possible) or if you’re sensitive to THC.

    What is Decarboxylation?

    Ever wonder why you have to light cannabis on fire or heat it in a vaporizer? The simple answer is “decarboxylation.” It’s an essential step when making your own CBD oil.

    Cannabinoids originally sit in an inert acidic form. For example, CBD is originally CBDA (cannabidiolic acid) prior to decarbing. When heated to a certain temperature, the CBDA undergoes a chemical change that turns it into CBD.

    The process of decarboxylation of the acidic form of CBD (CBDa) to Cannabidiol (CBD) with heat.

    How to Make CBD Oil at Home

    Now that we better understand CBD oil, it’s time to dive in on making CBD oil. The method we’ll describe today is the same one people use with any cannabis oil. It involves the use of dried flower from either an industrial hemp variety or “marijuana.”

    Today, plenty of vendors offer industrial hemp dry herb in a variety of different strains and strengths – all with less than 0.3% THC. You can also get high CBD, lower THC flower from a dispensary or medical provider, depending on the laws in your state.

    The following recipe will net you about 2 cups (500 ml) of CBD oil. The potency depends on how much CBD is in the dry herb, and the type/amount of carrier oil chosen. We recommend coconut oil because it does an excellent job retaining CBD and other cannabinoids.

    The amount of dry herb and oil you use isn’t written in stone. The less oil you use, the more cannabinoids get packed into it. The level of CBD in your dry herb also affects potency.

    But enough prepping – let’s make some CBD oil.

    Things You’ll Need on Making CBD Oil

      1. 1/2 oz (14 g) industrial hemp flower or another cannabis flower (if legal)
      2. Grinder
      3. Baking sheet
      4. Aluminum foil
      5. 1 cup (250 ml) coconut oil
      6. Oven and stove
      7. Oven thermometer (optional)
      8. Meat thermometer
      9. Pot or saucepan
      10. Paper towel or coffee filter

      Calculating Dosage When Making CBD Oil

      Got all your ingredients? Great! Now it’s time to figure out how strong your oil will be. This requires some simple math.

      Whether it’s industrial hemp or high-CBD “marijuana,” CBD levels vary from strain to strain. So let’s pretend your flower contains 20.0% CBD:

      • Take 20.0 and move the decimal to the right, which shows your herb has 200 mg/g of CBD.
      • Multiply that 200 by the number of grams you’re using – in this case, 14.
      • We see that the total CBD in your batch will equal 2800 mg prior to decarboxylation.
      • Now, we need to know the CBD per milliliter (ml), so divide 2800 by the 250 ml of coconut oil we’re using, which comes to 11.2 mg/ml of CBD oil.

      If you find this dose is too little or too much, increase/decrease the amount of dry herb as needed. You can also add more oil to dilute the mixture.

      To know how much CBD potency the hemp flower has, make sure you have the third-party lab report to get that number.

      Here is a visual of a lab report on a cannabis hemp flower rich in CBD. As you can see, this hemp flower has a potency of 16% CBDA (cannabidiolic acid), which CBDA would then be converted to CBD after decarboxylation. Every 1,000mg of oil will contain roughly 160mg of CBD.

      7 Steps on How to Make CBD Oil

      Step 1: Preheat the Oven

      Preheat your oven to 225 o F. This is a solid middle-ground. But remember that oven temperature isn’t likely to reflect the exact number shown on your stove.

      It’s handy to have a simple oven thermometer if you want to keep a more precise tab on temperature. Undercooking won’t properly activate the cannabinoids while overcooking evaporates them away.

      Step 2: Grind the Flower

      Using your grinder , coarsely grind your cannabis flower . A simple metal hand grinder is a great choice, as these tend to give you the consistency you need.

      Don’t over-grind it. If the pieces are too small, you’ll burn them before you even start making your own CBD oil.

      Step 3: Prepare the Ground Cannabis

      Line your baking sheet with aluminum foil . Evenly lay out the ground cannabis flower on your baking sheet. It’s important to keep it in an even, single layer. Otherwise, the flower won’t cook evenly.

      Finally, cover the sheet with aluminum foil .

      Step 4: Decarboxylate the Hemp Flower

      If you have an oven thermometer inside the appliance, check to make sure you have the right temperature. If the difference is more than 20 o F in either direction, adjust the heat as needed.

      Bake for 30 minutes, then remove and let the hemp cool for 45 minutes. Once cool, lift the layer of aluminum foil. If everything went well, the herb will have golden brown, toasted color.

      Below is an image of grinded cannabis flower on the left prior to decarboxylation, and decarbed flower on the right.

      The picture was taken from Madison Cole from Herbal Dispatch.

      Step 5: Mix CBD with Coconut Oil to Make Tincture

      Turn your pot or saucepan to low heat, and add the coconut oil. DO NOT allow it to simmer or sizzle.

      Use the meat thermometer to check the oil temperature. It should hover at around 150 o F. If the mixture exceeds 200 0 F, you could cause some cannabinoids to evaporate during cooking.

      You can use an overhead stirrer like this to set it on automatic, and it will mix the CBD extract with coconut oil to make CBD oil tinctures.

      Step 6: Complete the Oil Infusion to make CBD Oil Tinctures

      Cook the mixture for 30 minutes to 4 hours. The longer you cook, the more cannabinoids get infused into the oil, and the stronger your final product will be.

      Step 7: Strain

      Place a coffee filter or paper towel above a cup, small pot, or another container. Carefully and slowly pour the oil onto the filter or paper towel to separate and discard the plant matter.

      Pro tip: Use two or three paper towels layered together, as a single one could rip while you pour the oil.

      CBD Oil Uses

      Congratulations on your first batch! Now that you can make your own CBD oil, it’s time to put it to good use. Although oil is typically associated with straight oral ingestion, there are other things you can do with it.

      For instance, you can use it in edible recipes to make an endless range of tasty CBD-rich treats, or mix it with moisturizer to create a soothing topical. Some people add it to smoothies or use it as a salad dressing.

      Ultimately, there’s almost no limit to what you can do with CBD oil.

      How to Make CBD Oil: Final Thoughts and Tips

      While making CBD oil, it’s important to consider safety. There are also some tips we want to address that’ll make your CBD cooking experience much better.

      Safety when Making CBD Oil

      Fortunately, you won’t be working with explosive substances like butane, nor will you need to worry about leaving solvent traces behind (alcohol method). Aside from “don’t burn yourself,” there’s really nothing else to worry about during the cooking process.

      CBD itself, however, is another story. The cannabinoid is known to interact with a broad range of medications . Talk to your doctor before adding CBD to your health routine.

      DIY Guide: How to Make Your Own CBD Oil From Hemp

      People use CBD oil to reduce pain, ease anxiety, combat inflammation, and improve their response to daily stressors. With so many benefits, as well as advanced technology involved in making CBD oil, commercially available products can be expensive.

      And you know what?

      You can easily make CBD oil at home if you want to save money.

      While it won’t be crafted with the same precision as professionally extracted CBD oils, a homemade batch of sublingual drops is still safer than some of the untested and mislabeled products sold in vape stores and head shops.

      If you’re looking to make CBD oil at home, you’ll need just two ingredients: high-CBD hemp flower and a carrier oil such as MCT oil, hemp seed oil, or olive oil. Alternatively, you can use alcohol as the solvent, which we’ll also cover in the article.

      The Benefits of Making CBD Oil at Home

      People take CBD in various forms, but oil is one of the staple products. People usually buy their CBD oil online or in dispensaries, but ultimately it depends on where you live. Some states will spoil you with choice, whereas others will offer limited options. That’s why we always recommend getting your CBD from a trustworthy online retailer.

      More to the point, those with far fewer options may want to consider making their CBD oil at home to save time on browsing hundreds of products and comparing different brands. If you have the know-how, what can go wrong?

      Not only that, but you’ll also save money on your monthly supplementation. High-quality CBD oils can be expensive, especially when coming from reputable brands.

      If these two aspects are your priorities, then making CBD oil at home is a viable option.

      Let’s take a look at these few simple ingredients that can yield great CBD oil straightaway.

      What You’ll Need to Make CBD Oil at Home

      First, you need to consider your extraction method and check if you can get some quality hemp flowers somewhere near you. If not, look for high-CBD strains online; there’s a lot of great companies shipping their flowers to all 50 states.

      Speaking of which, let’s take a look at how to pick the right strain for making CBD oil at home.

      Strain Selection: Selecting a High-CBD Strain

      CBD can be extracted from both hemp and marijuana.

      While all hemp strains grown for CBD oils contain higher than average CBD levels, this isn’t the case for marijuana plants.

      Marijuana is typically higher in THC, but you can find some high-CBD hybrid strains obtained through selective breeding. If you can find these somewhere near you — provided that you live in a place where marijuana is legal — making CBD oil at home from this type of cannabis is fine.

      If you want a product that’s legal in all 50 states, we recommend that you look for high-CBD hemp flower online.

      Decarboxylation: Activating the CBD

      If you want to make CBD oil, you need to make sure that the CBD has been converted from its inactive precursor CBDA. CBDA is an acid that has many health benefits of its own, but it doesn’t have the properties of CBD.

      Yes, you’ve read that correctly. There’s no CBD in raw, unprocessed hemp plants. If you want to extract CBD from hemp, you need to activate it through heat before combining the plant material with the solvent of your choice.

      You can activate CBD through other means of heating. The most common decarboxylation method for making CBD oil at home is the oven method. Some people use a slow cooker, which is another inexpensive way to activate CBD. However, these methods are also imprecise and may not activate your cannabinoids efficiently.

      If you want to perform decarboxylation properly, you’ll need a decarboxylator, also known as a precision cooker. This device can maintain optimal temperatures needed for the full activation of CBD and trace cannabinoids without destroying terpenes. Using a professional decarboxylator is a worthwhile investment for anyone who makes CBD oil at home regularly and is looking for a consistently good product.

      What Alcohol / Carrier Oil Are You Going to Use?

      If you’re ready to make CBD oil at home for the first time, you’ll first have to decide which method you want to use. Amateurs have two options to choose from: food-safe alcohol or carrier oil.

      Alcohol extraction requires you to soak the hemp plant in alcohol until it strips all the beneficial compounds from it. The process also requires patience because the extract gains potency over time. The longer you let the product sit, the stronger it will get. This is how cannabis tinctures are made.

      The second method involves using natural plant oils as carriers due to CBD’s fat-solubility. It’s a gentle process for which you can use hemp seed, olive, and coconut oils.

      There’s also a third extraction method. However, this one is reserved for professionals, as it involves the use of pressurized CO2. This method requires a lot of space, extremely expensive equipment, and scientific knowledge to perform properly. It’s by far the best method to produce CBD oils, but since it can’t be performed under home conditions, let’s stick to the first two.

      Extraction Methods: Different Ways of Making CBD Oil at Home

      In this section, we’ll focus on making CBD oil at home using the two methods discussed above.

      1. Make CBD Oil Using Alcohol

      Ingredients:

      • 30 grams of ground hemp flower
      • High-proof, food-grade alcohol

      Equipment:

      • Mixing bowl
      • Parchment paper
      • Baking tray
      • Grinder
      • Catchment container
      • Double boiler
      • Wooden spoon
      • Funnel
      • Spatula
      • Plastic syringe
      • Fine strainer

      Instructions:

      1. Decarboxylate your plant matter by grinding it up to an even consistency and placing it on a baking tray lined with parchment paper. Place your hemp flower in a preheated oven at 225 F (110 C) and let it bake for one hour.
      2. Place your decarboxylated flower in the mixing bowl and submerge it completely in the alcohol. Use the wooden spoon to stir the decarbed buds for up to 10 minutes. During this time, the alcohol will extract the desired compounds such as cannabinoids and terpenes. Stirring the mixture speeds up the process by shaking off the trichomes that produce these compounds.
      3. Separate the CBD-infused extract from the plant matter. Strain your liquid through a piece of cheesecloth into a collecting container below. You’ll notice that the solution has a dark green color. Repeat this process until your extract becomes more clear.
      4. Set up a double boiler. Pour the alcohol tincture into the top of the boiler and apply steady heat. High-proof alcohol is highly volatile and will evaporate at low temperatures. If necessary, turn the heat on and off. Make sure that you have a decent ventilation system, and if not, perform this extraction outdoors. The vapor from alcohol is highly flammable and poses a risk of explosion.
      5. Once all the alcohol has evaporated, the extract will have a viscous, tar-like consistency. You can draw it up into a large syringe while it’s still warm or keep it in a bottle with a glass dropper.

      2. Make CBD Oil Using a Carrier Oil

      Ingredients:

      • 30 grams of high-CBD hemp flower
      • 450-500 ml carrier oil (hemp seed and coconut are the best)

      Equipment:

      • Baking tray
      • Parchment paper
      • Herb grinder
      • Double boiler
      • Glass jar with lid
      • Cheesecloth

      Instructions:

      1. Decarboxylate the hemp flower using the same method as in the recipe above.
      2. Now it’s time to combine the flowers and oil to start the extraction process. Place the two ingredients in the double boiler, feeling the bottom container with some water, and bring it to a light simmer. It’s important to ensure that it’s not a rolling boil because if you get the mixture past 150 C, the majority of terpenes will evaporate. The simmering process takes up to 3 hours, with the end product looking slightly darker than the unprocessed oil.
      3. Carefully remove the top of the boiler. Take your jar, place the cheesecloth over the top, and pour your mixture into the container. Make sure you have strained as much oil as possible from the hemp plant, then dispose of the flower.
      4. Seal the container and store it in a cool, dry place. You can use it as is or add it as an ingredient in your food recipes.

      Tips for Making CBD Oil at Home

      • Choose high-CBD flower
      • Use high-quality, healthy carrier fat
      • Be precise
      • Store your CBD oil as you would any other herb-infused oil
      • Try adding natural flavorings to the oil to improve its flavor.

      Advantages of Professional CBD Oil Extraction

      Now that you know how to make DIY CBD oil at home, you’re probably wondering how it turns out when compared with professionally manufactured oils — those obtained through CO2 extraction.

      As written earlier, CO2 extraction is the golden standard in the industry. This method yields safe, top-shelf products, but it requires an expensive triple-chamber machine, large amounts of flower, and an experienced professional to oversee the process. Using CO2 extraction guarantees pure and more potent products than any homemade method. If you’re looking for a superior product, CO2-extracted CBD oil is your best bet.

      Final Thoughts on Making CBD Oil at Home

      Making your own bottle of CBD oil at home is a good option to kickstart your CBD routine if you want to save time and money. In the meantime, you can do your research on the CBD market and compare different brands online to get a decent deal on quality products. Many premium companies offer reward programs, discounts, and bulk pricing on their CBD oils. But as you do your research, you will already have a bottle of safely made CBD oil to test your body’s response to this compound.

      Still, we recommend you purchase a professionally extracted CBD oil if you attempt to ease a specific condition. Commercial products are not only precisely crafted but they will also have the exact ingredients and potencies listed on the bottle.

      Have you tried to make CBD oil at home? Let us know in the comments!

      Livvy Ashton

      Livvy is a registered nurse (RN) and board-certified nurse midwife (CNM) in the state of New Jersey. After giving birth to her newborn daughter, Livvy stepped down from her full-time position at the Children’s Hospital of New Jersey. This gave her the opportunity to spend more time writing articles on all topics related to pregnancy and prenatal care.

      How to Make CBD Oil at Home

      If money is an issue for you, then you might want to consider making your own CBD oil at home. Even though your oil won’t be made with the same high-end equipment that most reputable brands use, homemade CBD oil can still be a lot safer than some of the potentially untested and poorly labeled products sold online through sub-par CBD brands or disreputable brick and mortar stores. If you’ve been wanting to make your own CBD oil at home, the good news is that you’ll basically only need two main ingredients: hemp flower that’s high in CBD, and a carrier oil like hemp seed oil, olive oil, or MCT (medium-chain triglyceride) oil like coconut oil.

      What are the Benefits of Making CBD Oil at Home?

      CBD products are available today in many different forms, however CBD oil appears to be one of the most frequently bought products. Typically, people purchase oils online or through brick-and-mortar stores. Since CBD’s rapid rise in popularity throughout recent years, there’s been an influx of brands into the market. While it’s exciting to have so many brands and product options to choose from, not all brands and products are created equal. Therefore, it’s always best to buy your CBD from a reputable and trustworthy brand.

      Since not all people have the finances to buy CBD oil online or in stores near them, making CBD oil at home might be the next best option. Additionally, it can be overwhelming searching through multiple brands and hundreds of products in an attempt to figure out which ones will be best suited for your health and wellness needs. If regularly purchasing high-quality products for sale online from reputable brands is financially prohibitive for you, then making homemade CBD oil is a viable option.

      Courtesy of Bridgette Finn

      Things You Will Need for Making CBD Oil

      Before you begin making CBD oil at home, you’ll need to figure out which extraction method you’ll use as well as if you can buy high-quality hemp flowers near you. If all else fails, then you can always search online for high-CBD strains, as there are a wealth of companies that ship flowers throughout the United States.

      How To Choose the Best CBD Strain

      First, you should understand that CBD can be extracted from both the hemp and marijuana plants, which are both strains of the cannabis plant. However, the 2018 Farm Bill only made it legal for hemp-derived CBD products to be sold and bought in the United States. These products must only contain 0.3% or less THC, or tetrahydrocannabinol, a cannabinoid in both the hemp and marijuana plants that causes a euphoric “high” when ingested in large quantities. All hemp strains naturally contain less than 0.3% THC, while the marijuana plant contains well over that amount. Because the THC levels are so low in hemp-based CBD oils, there’s no way for anyone to get “high” from using them. If you’re concerned about the legality of making your own CBD oil at home, then it’s probably best to craft your oil from the hemp plant. There are, however, certain states where medicinal and recreational marijuana are legal. Therefore, before making any homemade CBD oil, you should look into your state’s laws regarding CBD.

      Activating Your CBD

      When making your own CBD oil, you have to make sure that the CBD is transformed from its inactive CBDA form. For those who may not know, CBDA is an acid that contains many benefits but that doesn’t have any of the benefits commonly linked to CBD. In short, there’s no CBD in unprocessed hemp plants. Therefore, if you’re looking to extract CBD from hemp, then you need to activate it by using heat before mixing the plant material with a solvent.

      CBD activation takes place through a process called decarboxylation, which is a fancy term for heating. While an oven can be used to activate CBD, others have used slow cookers. Be aware, though, that these two methods are not an efficient way to activate CBD. Proper decarboxylation requires a decarboxylator, or precision cooker. When a precision cooker is used, optimal temperatures are maintained so that full activation of CBD and trace cannabinoids can happen without destroying any beneficial terpenes in the process. If you plan on regularly making your own CBD at home, then it’s worth investing in a precision cooker, as this will enable you to craft CBD oils that are consistently good.

      Courtesy of Bridgette Finn

      Choosing the Best Carrier Oil

      In making homemade CBD oil, you’ll have to decide whether you’ll use food-safe alcohol or carrier oil for your extraction. In alcohol extraction, the hemp must be soaked in alcohol until all of the beneficial compounds are stripped from it. Alcohol extraction takes an abundance of patience because the longer the hemp soaks in the alcohol, the more potent the extract will be. Alcohol-based CBD oils are called tinctures. When compared to oil extraction, the alcohol extraction method tends to be a bit harsher. In oil extraction, natural plant oils are used as carriers because of CBD’s fat solubility. You can use hemp seed oil, olive oil, and coconut oil for this gentle process.

      The third method is one that almost all reputable CBD brands use. In the CO2 extraction method, pressurized CO2 is used to extract all of the beneficial cannabinoids, terpenes, and phytonutrients from the hemp plant. This process requires a lot of space, expensive equipment, and the proper scientific know-how in order to perform it correctly. When it comes to extraction methods, this is by far the best process because extracts come out clean, pure, and are free from solvents and other impurities. That’s why the industry’s top CBD brands use this method. But since the CO2 method is so involved and specialized, it should not be performed at home.

      Different Ways to Extract Your CBD Oil at Home

      You can make CBD oil at home using these two step-by-step methods:

      Making a CBD Oil Tincture Using Alcohol

      Ingredients

      • Ground hemp flower — 30 Grams
      • Food-grade alcohol — High-proof

      Materials

      • Mixing Bowl
      • Parchment Paper
      • Cookie Tray
      • Grinder
      • Catchment Container
      • Double Boiler
      • Wooden Spoon
      • Funnel
      • Spatula
      • Plastic Syringe
      • Fine Strainer

      Directions

      1. Heat the plant by grinding it into an even consistency and spreading it on the cookie tray lined with parchment paper. Place the hemp flower in an oven preheated to 224 degrees Fahrenheit and let it bake for 60-minutes.
      2. Place the activated (decarboxylated) flower into a mixing bowl and cover it completely with alcohol. Using the wooden spoon, stir the buds for about 10 minutes. At this time, the alcohol will extract compounds like cannabinoids, terpenes, and phytonutrients. You can speed up the process by stirring the mixture.
      3. Separate the CBD-infused extract from the remaining plant components. Using cheesecloth, strain the liquid into a collection container. The solution may have a dark green color. Repeat this process until the extract looks fairly clear.
      4. Using a double boiler, pour the alcohol tincture into the top of the boiler and add steady heat. Please keep in mind that high-proof alcohol is volatile and evaporates at low temperatures. So you may have to turn the heat off and on. Additionally, make sure that the room you’re working in is properly ventilated because the fumes from the alcohol are extremely flammable.
      5. After all of the alcohol has evaporated, the extract will have a thick, tar-like thickness. While the extract is still warm, draw it up into a large syringe or place it into a dark glass bottle with a glass dropper.

      Making a CBD Oil Using a Carrier Oil

      Ingredients

      • High-CBD Hemp Flower — 30 Grams
      • Carrier Oil (Hemp Seed or Coconut Oils) — 450-500 ml

      Materials

      • Cookie Tray
      • Parchment Paper
      • Herb Grinder
      • Double Boiler
      • Glass Jar with Lid
      • Cheesecloth

      Instructions

      1. Heat the hemp flower using the same method as in the alcohol extraction process above.
      2. Combine the flower and the oil to begin the extraction process. Place the flower and the oil into the top part of the double boiler. Fill the bottom container with some water and bring it to a light simmer. Do not let it come to a rolling boil because the terpenes will evaporate at a temperature of 302 degrees Fahrenheit. Typically, it can take up to 3 hours to simmer the mixture. The final product will appear a touch darker than the unprocessed oil.
      3. Remove the top of the boiler. Next, place cheesecloth over the top of the glass jar and pour the mixture into the jar. Strain as much oil as possible from the hemp plant before discarding the remaining strained flower in the cheesecloth.
      4. Cover the jar and store it in a dry, cool area. Use the final product as needed.

      Quick Tips for Making CBD Oil at Home

      Some quick tips for making the best homemade CBD oil are as follows:

      • Use only the best hemp flower that’s high in CBD
      • Use a top-quality, healthy carrier oil
      • Use precision in following the recipes
      • Store the oil in the same way that you would any herb-infused oils
      • Mix it up by adding your favorite natural flavorings to the oil in order to make the flavor better

      Benefits of Professional CBD Oil Extraction

      Even though it may seem easier to make your own CBD oil at home, you might still be wondering if what you’re making is as potent and pure as the top-quality CBD oils that reputable brands craft. First, you should remember that reputable brands use the industry-preferred CO2 extraction process to obtain all of their clean and effective extracts. This process is considered to be the industry’s gold standard because it renders high-quality CBD products. Second, this process is mostly only used by professional brands because it requires a costly triple-chamber machine, huge quantities of flowers, and an experienced professional to watch over the entire process.

      Furthermore, using the CO2 extraction process ensures that the resulting products are more potent and pure than homemade oils. Therefore, if you’re looking for superior CBD oils that have the most benefits linked to them, then purchasing CO2 extracted oils from reputable brands will be your best option. If you’re in the hunt for an online CBD oil brand, then one of the first things you should do is to take the time to do some research into the brand, its extraction process, where it sources its hemp from, as well as read any third-party lab reports and verified customer reviews. Along the way, you can also do a deep dive into any other CBD-related topics that you want to learn more about.

      Dosing CBD Oil

      When it comes to dosing CBD oil, keep in mind that there’s not one set dose that works best for everyone. Since everyone’s body is different, a dose that works great for one person might not work that well for someone else. Finding the right CBD oil dose takes patience, time, and consistency. For example, if you’ve purchased a bottle of 600mg full-spectrum CBD oil, then begin by taking a half dropper-full once a day. This will equal 10mg of CBD oil once a day. Stay with this dose for 7-10 days before increasing. During this time, keep a journal so that you can write down anything you’re experiencing while on the dose, as well as what seems to be improving and what’s not getting any better.

      If you feel the need to increase the dose, move up to half a dropper-full twice a day, or 10mg twice a day. This will also equal 20mg of CBD oil a day. Stick with this new dose for another 7-10 days before deciding whether or not you want to increase again. If you feel you need more CBD oil, follow this same pattern until you’ve found the best possible dose for your unique health and wellness needs. Remember, you may also need to increase the strength of the oil or adjust the overall dosage over time.

      How to Use CBD Oil

      Taking CBD oil is a fairly straightforward process. In order to get the best results from your CBD oil, you should drop it sublingually and hold it there for about 60-seconds. When you do this, the cannabinoids, terpenes, and phytonutrients in the oil can enter your bloodstream through the thin membrane under your tongue. If you’re wanting to increase possible absorption, feel free to also swish the oil around in your mouth before swallowing it so that the CBD can also get into your bloodstream through the membranes of your mouth. Additionally, taking the CBD oil around the same time(s) each and every day will help ensure that you’re clear about the effects because you’ll have more of a reliable baseline.

      Courtesy of Bridgette Finn

      Final Thoughts

      Crafting your own homemade CBD oil is a fantastic option if you’re short on financial resources or are looking to save time and money. But before you set up a CBD workshop in the comfort of your home, you should research the CBD market as well as look at different online brands. You might just be able to get a solid deal on some top-shelf products. In fact, many reputable brands also offer discounts, rewards programs, as well as bundle prices on some of their CBD oils. If you still want to go ahead and make CBD oil at home, at least you’ll have your own bottle of clean, safely crafted oil to use while you’re researching.

      Making CBD oil at home can be time- and money-saving, but it’s still recommended that you purchase a high-quality, clean, and potent oil from a reputable brand. Commercial CBD oils are crafted with precision and have all of the product’s ingredients, strength, and variety (full-spectrum, broad-spectrum, or CBD isolate) clearly printed on the packaging and the bottle. So, if there’s a specific health issue that you’re trying to address or a wellness goal that you’re trying to achieve, it’s best if you buy a potent and effective CBD oil from a highly reputable brand.

      How useful was this post?

      Click on a star to rate it!

      Average rating 5 / 5. Vote count: 1

      No votes so far! Be the first to rate this post.

See also  CBD Gummies Amazon